How Long Is 1.375 Inches? 12 Items Measuring 1.375 Inches Long

1.375 inches equals 3.49 centimeters (34.9 mm) a size that quietly shows up in dozens of everyday objects around you. It’s roughly the length of your thumbnail nail from base to tip, about the width of two standard AAA batteries side by side, or close to the diameter of a golf ball.

Whether you’re sizing a screw for a repair job, checking hardware at the store, or comparing small parts without a ruler, recognizing common 1.375-inch references gives you an instant reference point. Let’s explore the everyday items that perfectly demonstrate this surprisingly practical measurement.

Quick Conversion:

Unit	Equivalent Value
Inches	1.375 in
Centimeters	3.4925 cm
Millimeters	34.925 mm
Feet	0.1146 ft
Yards	0.0382 yd

How Long Is 1.375 Inches?

1.375 inches equals exactly 34.925 millimeters (3.49 cm). Picture a standard 12-inch (30.5 cm) ruler. Now look at the space between the 1-inch and 1⅜-inch marks that gap is exactly this size. It’s roughly a little over halfway between 1 inch and 1½ inches.

For a body-scale check: press your thumb and index finger together. The width of your index finger at the knuckle is close to ¾ inch (1.9 cm) for most adults. Add one more finger width and you’re right at 1.375 inches. It’s a small but very real distance you can feel between your fingertips.

Things That Measure 1.375 Inches Long

These everyday items demonstrate exactly how long 1.375 inches is in real life. From hardware and stationery to toys and batteries, this measurement appears constantly in objects you touch every single day.

Medium Machine Screw

A #8 or #10 medium machine screw is commonly sold at 1.375 inches (34.9 mm) long. This length gives enough thread grip without punching through standard cabinet or panel thickness. Hardware technicians and appliance repair pros rely on this exact size daily.

You’ll find this size in millions of flat-pack furniture kits, electrical panels, and computer cases. Every time a tech rebuilds a desktop PC, there’s a good chance they’re handling 1.375-inch (3.49 cm) screws by the handful.

House Key Shaft

The blade (shaft) of a standard house key measures very close to 1.375 inches (34.9 mm) in length. This specific blade length is designed to reach and turn all the tumblers inside a typical residential door lock. Locksmiths use this as a standard reference when cutting duplicate keys.

Billions of house keys around the world share this approximate blade length. Every time you unlock your front door, you’re using something almost exactly 1.375 inches (3.49 cm) long to do it.

USB Connector (Full Assembly)

A standard USB Type-A connector head, including its plastic housing, measures approximately 1.375 inches (34.9 mm) in total length. This size is carefully engineered to plug securely into any USB-A port while leaving just enough of the cable free. Electronics engineers design around this dimension when spacing ports on motherboards and hubs.

You probably plug in a USB connector at least once a day. Every phone charger, keyboard, or flash drive you’ve ever used has a connector almost exactly 1.375 inches (3.49 cm) long on the plug end.

Binder Clip (Small Size)

The face width of a small binder clip the flat metal part that grips your papers measures 1.375 inches (34.9 mm) across. This size is engineered to clip stacks of up to 35–45 sheets without slipping. Office supply managers and teachers keep these in bulk because the size works perfectly on standard documents.

You’ll find small binder clips in nearly every desk drawer in an office. Millions of students use clips this wide exactly 1.375 inches (3.49 cm) across to organize their schoolwork every single day.

Lego Brick (Slightly Longer)

A standard 2×1 Lego brick measures approximately 1.375 inches (34.9 mm) in length along its long side. Lego engineers design every brick to exact tolerances so the pieces click together perfectly every time. Set designers and architects who build Lego models professionally know these dimensions by heart.

Over 400 million children and adults build with Lego sets worldwide. When you snap two bricks in a row, the total length you’re working with is close to 1.375 inches (3.49 cm) per standard 2-stud brick.

Large Paperclip (Jumbo)

A jumbo (large) paperclip stretches to exactly 1.375 inches (34.9 mm) in length. This larger size holds bigger document stacks without bending out of shape. Administrative professionals and legal offices use jumbo paperclips specifically because this length provides a stronger, more reliable grip.

Paperclips are one of the most-produced metal objects on Earth. The jumbo version at 1.375 inches (3.49 cm) long is the go-to choice for anyone working with thick contracts, reports, or multi-page files.

AA Battery Diameter (Stacked)

Place two AA batteries side by side and measure their combined diameter. Two AA batteries together span exactly 1.375 inches (34.9 mm) across. A single AA battery has a diameter of about 0.55 inches (14 mm), so two together land right at this mark. Electronics designers use this stacking dimension when laying out battery compartments.

AA batteries power remote controls, toys, clocks, and flashlights in billions of households. Whenever you change batteries and set two of them flat side by side, that combined width is almost exactly 1.375 inches (3.49 cm).

Button Battery (CR2032 Stack)

Stack four CR2032 coin batteries on top of each other. Their combined height reaches approximately 1.375 inches (34.9 mm). Each CR2032 cell is 3.2 mm (0.126 inches) thick, so four stacked together measure 12.8 mm close enough to this benchmark that engineers use it as a planning reference. Electronics and hearing aid designers count stacked cell heights this way to plan compact device sizes.

CR2032 batteries power everything from key fobs to medical devices and watches. The four-battery stack height of 1.375 inches (3.49 cm) is a useful visual cue the next time you handle these tiny power cells.

Small Nail (Finishing Nail)

A 4d finishing nail one of the most common trim nails in carpentry measures 1.375 inches (34.9 mm) in length. This nail length drives perfectly into baseboards and door trim without splitting the wood. Carpenters and finish woodworkers reach for this exact size when attaching delicate molding around windows and floors.

Finishing nails this size are sold in boxes of thousands at every hardware store. Any home with wooden trim likely has dozens of 1.375-inch (3.49 cm) nails quietly holding it all together behind the paint.

Standard Staple (Before Bending)

Unfold a standard office 26/6 or 24/6 staple flat. Its total wire length before bending measures approximately 1.375 inches (34.9 mm). Staple manufacturers calibrate this length so the legs fold over cleanly after punching through paper. Office supply engineers design the wire length precisely to match the stapler’s jaw depth and paper capacity.

Staples are one of the most-used fasteners in the world offices consume trillions per year. The next time you reload your stapler, remember that every single straight staple in that strip is 1.375 inches (3.49 cm) long before it bends.

1.375 Inches Anywhere (No Ruler Needed!)

House Key Shaft Length Carry your house key with you everywhere. The blade from the tip to the shoulder is very close to 1.375 inches (34.9 mm). Pull it out any time you need a quick length check it’s already in your pocket.

Jumbo Paperclip Keep a jumbo paperclip on your desk or in your bag. Its total length is exactly 1.375 inches (34.9 mm). Lay it next to any object and you have an instant, reliable measuring guide with zero effort.

Lego Brick (Slightly Longer Than Standard) A standard 2×1 Lego brick is right at 1.375 inches (34.9 mm) long. If you have kids or if you’re a builder yourself grab a single brick for a fun and surprisingly accurate measurement reference.

Small Binder Clip (Across the Face) The metal face of a small binder clip spans 1.375 inches (34.9 mm) across. These live in every office and most home desks. Press the clip face against your item and you have a perfectly sized gauge on the spot.

1.375 Inches Matters in Everyday Life

Buying the right screw for a repair job becomes faster when you recognize the 1.375-inch length. Grabbing the correct hardware on the first try saves you a second trip to the store and keeps your project moving.

Shopping for replacement parts online gets easier when you know this exact measurement. Accurate sizing means fewer returns and fewer frustrating fits — and more money and time staying in your pocket.

Organizing your desk or toolbox improves once you understand what fits in a 1.375-inch space. Binder clips, staples, and small nails all share this range, making storage planning fast and intuitive.

Safety at home and at work depends on using the right fastener in the right length. A 1.375-inch finishing nail or machine screw, used correctly, holds materials firmly without risk of splitting or over-penetrating.

Read: How Long Is 15 Inches
Read: How Long Is 1.25 Inches
Read: How Long Is 100 Inches
Read: How Long Is 5.7 Inches
Read: How Long Is 9 Inches
Read: How Long Is 20 Inches?

Frequently Ased Questions

Conclusion

1.375 inches appears constantly in your daily life through house keys, binder clips, finishing nails, staples, and USB connectors. This practical measurement equals exactly 34.9 mm (3.49 cm) close to the length of two stacked AA battery diameters or a single standard 2×1 Lego brick.

Now that you recognize common 1.375-inch items, you can size hardware faster, shop online with more confidence, and check small measurements without a ruler. Use your house key shaft, a jumbo paperclip, or a small binder clip whenever you’re making repairs, organizing parts, or comparing small objects for better accuracy and confident decisions every time.